بروز رسانی نرم افزار MicroSurvey FieldGenius

بروز رسانی نرم افزار MicroSurvey FieldGenius ورژن 11.1.1.0 در تاریخ November 3, 2021 منتشر گردید. (Release Note)

بروز رسانی نرم افزار MicroSurvey FieldGenius ورژن 11.1.1.0 دارای امکانات پیشرفته تری نسبت به ورژن های قبلی می باشد. و این نسخه دارای بالاترین پایداری نسبت به نسخه های پیشین می باشد. در این نسخه از نرم افزار، شرکت ماکروسرویی تمرکز بیشتری را بر روی بهبود سرعت رابط کاربری داشته است. بهبود سرعت رابط کاربری نرم افزار یکی از المان های مهم در کسب رضایت کاربران می باشد. برای نرم افزار ماکروسرویی فیلدجنیوس ورژن 11 که مجموعه ای از ابزار های کاربردی را در دل خود جای داده است. که در بهبود سرعت نرم افزار بسیار مهم است. در بروز رسانی های قبلی نرم افزار شاهد این موضوع بودیم که شرکت Microsurvey تمرکز خود را برای نظم بخشیدن به ابزار ها و پروسه های نرم افزاری داشت. این بدین معنی است که شرکت ماکروسرویی در حال تهیه فلوچارت پروسه محوری است. که کاربران در کمترین زمان ممکن قابلیت دسترسی به ابزار های مختلف را بر پایه دانسته های نقشه برداری داشته باشند. این بهبود در کیفیت طراحی نرم افزار وابستگی کاربر را به استفاده از راهنما کمتر می کند. و در عین حال مرور دانسته های اکتسابی از راهنما را آسان تر می نماید. تغییرات مهم در نرم افزار Microsurvey FieldGenius ورژن 11.1.1.0 به شرح ذیل می باشد:

ویژگی های جدید در بروز رسانی نرم افزار MicroSurvey FieldGenius

Microsurvey FieldGenius 11.1.1.0 Software released on November 3, 2021

NEW FEATURES

Display E-bubble – Updated the UI to display the e-bubble on the instrument toolbar when tilt correction is enabled.
Perpendicular Offset – updated the default setting to enhance the efficiency of using the feature.

NEW AND UPDATED INSTRUMENT DRIVERS

GNSS

Alpha-geo L8 – Added new driver.
Alpha-geo NetBOX1+ NetBOX1 Pro – Added new driver.
CHC i73 – updated driver to fix crash result when receiver battery depletes.
ComNav RTK + RTK (IMU) – Added new generic RTK & RTK (IMU) driver options to support all ComNav receivers.
GeoMax Zenith 60 – Added new driver.
Gintec G20 + G20M – Added new driver.
KQGEO M8Mini (IMU) – Added New Driver.
South RTK – Added new generic RTK driver to support all South receivers with no tilt support.
South Galaxy G1– Fixed issue where an LSQ error would appear on the receiver.
South Splice Plate Offset – Corrected an incorrect splice offset parameter.
Tersus Oscar – Updated driver to support requesting NTRIP source table.

Total Station

E-Survey E3 – Added new driver
GeoMax Zoom 75/95 – Added new driver
Sanding Arc5 Pro – Added new driver

Coordinate Systems

MGA 2020 Systems – Added MGA 2020 systems to the Australian coordinate systems group.
State Planes NAD83-TX83-NC – Updated coordinate system extents to resolve an issue with some GNSS positions falling outside of the projection.

DEFECTS FIXED in MicroSurvey FieldGenius Software 11.1.1.0

DWG Import – Resolved issue with some 2018 .dwg’s unable to import.
GNSS Transformation – Fixed issue where some points were ignored being translated.
GNSS Offset Measurement – Fixed issue with offsets being computed when a local transformation is applied.
Point Averaging – Fixed issue where point averaging would cause a crash.
Scale Factor Reset – Fixed issue where the scale factor would get reset if user selected a LandXML.

Known Issues

Disto S910 – First photo taken with project can provide an error, additional photos are taken and stored fine.
Photo Notes – Camera rotation is not supported.
LandXML – LandXML alignments containing a sequence of Spiral-Curve-Spiral-Curve-Spiral are not properly displayed.
Multiset Structured – Angle only backsight is not available.

بروز رسانی نرم افزار MicroSurvey FieldGenius

Microsurvey FieldGenius 10.4.1.2 Software released on August 21, 2020

NEW FEATURES

This is a service pack release for FieldGenius to add support for new survey instruments and fix high priority defects.

NEW AND UPDATED INSTRUMENT DRIVERS

GNSS

  • CY F100 – Added New Driver.
  • Hemisphere S631 GNSS – Added New Driver.
  • Tersus GNSS Devices – Updated reference distance for GNSS.
  • GENEQ F100 – Updated Driver.
  • Leica Devices – Add support for Satel 900MHz Radio.
  • Tersus – Add support for GSA and GSV messages.
  • Stonex – Add S990A and S980 – Added New Driver.
  • KOLIDA K1PRO and K20s – Added New Drivers.
  • CHC i80 – Updated driver to support new firmware version.

Total Station

  • CHC CTS-112R4 – Added New Driver.

Coordinate Systems

  • No new coordinate system updates.

DEFECTS FIXED in MicroSurvey FieldGenius Software 10.4.1.2

  • Observation Toolbar – Fixed bug when switching to staking mode.
  • Changing GNSS Tolerance – Fixed wait dialog does not close issue.
  • eSurvey E100 – Updated driver to address GSM issue.

Known Issues

Disto S910 – First photo taken with project can provide an error, additional photos are taken and stored fine.

Photo Notes – Camera rotation is not supported.

LandXML – LandXML alignments containing a sequence of Spiral-Curve-Spiral-Curve-Spiral are not properly displayed.

Multiset Structured – Angle only backsight is not available.

NEW FEATURE AND DRIVER DETAILS

none

بروز رسانی نرم افزار MicroSurvey FieldGenius

Microsurvey FieldGenius 10.4.1.0 Software released on 27th May, 2020

NEW FEATURES

This is a service pack release for FieldGenius to add support for new survey instruments and fix high priority defects.

NEW AND UPDATED INSTRUMENT DRIVERS

GNSS

  • FieldGenius Inverse Function – Added the option to output both metric and imperial.
  • Tersus – Added tilt functionality for GNSS receivers that use IMU technology to determine.
  • eSurvey – Added support for the following GNSS receivers:
    • E800H
    • E800T

Coordinate Systems

  • No new coordinate system updates.

بروز رسانی نرم افزار MicroSurvey FieldGenius

DEFECTS FIXED in MicroSurvey FieldGenius Software 10.4.1.0

  • Sokkia – Fixed an issue with Sokkia GNSS Receivers displaying the incorrect Slope Distance (SD) value in the Raw File record.
  • Stake Elevation – Fixed an issue with the staked results dialog showing the incorrect design elevation value.
  • FieldGenius – Fixed an issue that with Autostore enabled and the option to continue applying a note to new observations enabled the note was not being recorded in subsequent new observations.
  • South – Fixed a connection issue on Windows 10 devices with the South S660N and Galaxy G1 Plus GNSS receivers.
  • ESurvey – Resolved Bluetooth connection issue for the following receivers:
    • E600H
    • E600T
    • E600N
    • E300 Pro
    • E100

Known Issues

Disto S910 – First photo taken with project can provide an error, additional photos are taken and stored fine.

Photo Notes – Camera rotation is not supported.

LandXML – LandXML alignments containing a sequence of Spiral-Curve-Spiral-Curve-Spiral are not properly displayed.

Multiset Structured – Angle only backsight is not available.

NEW FEATURE AND DRIVER DETAILS

none

MicroSurvey FieldGenius Update Released

Microsurvey FieldGenius 10.4 Software released on 8th April, 2020

NEW FEATURES

This is a service pack release for FieldGenius to add support for new survey instruments, add and update coordinate systems and fix high priority defects.

  • Added the ability to save the last selected GNSS update rate for a receiver so the next time the receiver is used the last selected updated rate is.

NEW AND UPDATED INSTRUMENT DRIVERS

GNSS

  • CHC i90 – Added a new driver with support for IMU tilt
  • eGPS eGPS20T – Updated driver with support for IMU tilt
  • IGAGE iG9 – Updated driver with support for IMU tilt
  • Leica GS07 – Add new
  • Bince N90 – Add new
  • South S660N – Add new
  • Kolida S680N – Add new
  • Ruide S680N – Add new
  • Sanding S680N – Add new
  • SOUTH Galaxy G6 – Updated driver with support for IMU tilt
  • Stonex S700A – Add new
  • Stonex S850A – Add new
  • Stonex S900- Updated driver with support for IMU tilt
  • Stonex S900A– Updated driver with support for IMU tilt
  • GeoMax Zenith 16 – Added a new
  • Geoelectron – Updated the driver to automatically start as an operating base station if it was previously setup up correctly prior to being powered.

Coordinate Systems

  • Netherlands RDNAP2008 – Added support for gsb.
  • Created Korean geoid (2018).
  • Added the Cyprus Local Transverse Mercator (CGRS93) to the “EUROPE”
  • Austria coordinate system
  • Added support for Austria M31 and M34 coordinate

DEFECTS FIXED in MicroSurvey FieldGenius Software 10.4

  • GeoMax Zoom 90 – Fixed the Zoom 90 total station storing staked point reverts prism height to
  • Tersus – Fixed Oscar geoid undulation
  • Data collector internet – Updated support for long user
  • Roading – FieldGenius standard license is able to access Roading Module
  • CHC – Fixed X91
  • South – Fixed GSM connection
  • Roads Manager – Fixed issue with roads not being saved to a project after closing
  • Leica – Fixed DCI issue with
  • Geozone – FalconSF driver update.

Known Issues

Disto S910 – First photo taken with project can provide an error, additional photos are taken and stored fine.

Photo Notes – Camera rotation is not supported.

LandXML – LandXML alignments containing a sequence of Spiral-Curve-Spiral-Curve-Spiral are not properly displayed.

Multiset Structured – Angle only backsight is not available.

NEW FEATURE AND DRIVER DETAILS

none , MicroSurvey FieldGenius Update Released

در صورت تمایل به  خرید و آموزش نسخه جدید نرم افزار Microsurvey FieldGenius ورژن 11 ساخت کمپانی ماکروسرویی کانادا با ما تماس بگیرید.

ادمینAuthor posts

Avatar for ادمین

طراح حرفه ای وب سایت در ایران.

No comment

دیدگاهتان را بنویسید