نرم افزار نقشه برداری MicroSurvey CAD

نرم افزار نقشه برداری MicroSurvey CAD


بروز رسانی نرم افزار MicroSurvey CAD 2021

بروز رسانی نرم افزار MicroSurvey CAD منتشر شد: کمپانی نرم افزاری ماکروسرویی مفتخر است انتشار بروزرسانی اولین نسخه از Microsurvey CAD 2021  را به شما کاربران عزیز اعلام نماید. در این نسخه از سرویس پک بسیاری از مشکلات مهم نرم افزار برطرف گردیده است، و سرعت اجرا و پردازش نرم افزار افزایش پیدا کرده است. امکانات بسیار جدیدی هم در سطح کاربری نرم افزار ماکروسرویی و هم درموتور پردازشی IntelliCAD افزوده شده است که این امر نرم افزار کاکروسرویی را به بهترین انتخاب برای نقشه برداران و مهندسین عمران کرده است.

Microsurvey & IntelliCAD

نرم افزارهای ماکروسرویی کاربران را با یک رابط کاربری بسیار قوی و یک مجموعه کامل از ابزارهای طراحی نقشه شامل انواع COGO, DTM,  پیمایش، سرشکنی، محاسبه احجام، منحنی میزان و بسیاری از امکانات دیگر تجهیز می نماید. بروز رسانی نرم افزار MicroSurvey CAD تایید شده و قدرت گرفته از موتور بسیار قوی IntelliCAD می باشد که با نرم افزارهای پیشرفته AUTOCAD سازگاری کاملی دارد. این ویژگی ها در پنج سطح مختلف بیسیک، استاندارد، پریمیوم، آلتیمیت و استدیو تقیسم یندی می شوند که به کاربران تجربه وسیعی از انتخاب گسترده با توجه به نیاز پروژه را می دهند.

تغییرات مهم نرم افزار ماکروسرویی MicroSurvey CAD 2021 :

IntelliCAD 10.0: شامل بهبود بسیار زیادی در بخش ویرایش فوری بلوک ها، رفرنس های خارجی، انتخاب مقادیر در لایه های قفل شده، و ویرایش متون چند لایه.

بهبود عملکرد: شامل یک تغییر اساسی در محیط اجرایی ویندوز 10 بعد از بروزرسانی Windows 10 Fall Creator Update که باعث بهبود پاسخگویی نرم افزار بعد از انتخاب اشیاء هوشمند و باز شدن پنجره مربوطه و بهبود اجرای کامندها در محیط کد می باشد.

مشکلات مهم رفع شده: در بخش COGO, AutoMAP Library, Lot Closures و سایر بخش های دیگر. ترسیم عوارض معماری: این عوارض شامل دیوارها، درها، پنجره ها، دریچه ها، سطوح کف طبقات، سطح پشت بام جهت مدل سازی سریع ساختمان ها.

همگام سازی با Leica Cyclone Object Exchange: ورود و خروج دستورات کامند جهت انتقال عوارض بین نرم افزار ماکروسرویی MicroSurvey CAD و لایکا سایکلون Leica Cyclone.

جهت اطلاع از تغییرات دیگر در بروز رسانی نرم افزار MicroSurvey CAD به نوار آکاردیونی پایین متن زیر مراجعه فرمایید.

جهت دانلود ورژن آزمایشی رایگان این نرم افزار بر روی لینک مناسب کلیک نمایید.

MicroSurvey CAD 2021 (21.0.9.1175) – November 10, 2020

MicroSurvey CAD 2021 Hotfix (21.0.13.1412) – December 22, 2020

نسخه آزمایشی نرم افزار ماکروسرویی کد تا 30 روز بر روی سیستم شما فعال می باشد و شما قادر خواهید بود از تمام امکانات نرم افزار به طور کامل بدون محدودیت استفاده نمایید لطفا برای مشاهده تغییرات بروز رسانی نرم افزار MicroSurvey CAD را مطالعه نمایید.

کاربران فعلی نرم افزار ماکروسرویی کد قادر خواهند بود با آسانی نرم افزار خود را با استفاده از ابزار بروز رسانی خودکار نرم افزار آپدیت نمایند. بروز رسان خودکار برای تمام کاربران هر 14 روز یکبار فعال می گردد تا در صورت وجود بروز رسانی شما را مطلع گرداند. بروز رسان همچنین امکان اجرای دستی توسط کاربر را دارا می باشد و پس از تایپ دستور UPDATECHECK در بخش کامند نرم افزار یا با کلیک کردن روی کامند Check For Updates در سربرگ Help نرم افزار اجرا می گردد. حتما قبل از انجام این کار بروز رسانی نرم افزار MicroSurvey CAD ورژن جدید و لیست تغییرات را مطالعه نمایید.

کاربران فعلی نرم افزار که از دانگل USB استفاده می کنند و دارای عضویت خدمات پس از فروش نرم افزار می باشند باید از برنامه USB License Manager جهت برروز رسانی قفل نرم افزار استفاده نمایند تا بتوانند ورژن جدید نرم افزار را پس از اتمام 30 روز آزمایشی استفاده کنند. اگر عضویت خدمات پشتیبانی شما تمام شود لطفا با ما تماس بگیرید تا جدید تمدید آن اقدامات لازم را با توجه با انتشار بروز رسانی نرم افزار MicroSurvey CAD انجام گیرد.

دانلود برنامه های کمکی بروز رسانی نرم افزار MicroSurvey CAD

MicroSurvey Transfer (free add-on for FieldGenius users, requires Microsoft ActiveSync or Windows Mobile Device Center): click here

MicroSurvey USB License Manager (included in the MicroSurvey CAD install): click here

MicroSurvey USB Network License Server (must be purchased separately, requires a password to install): click here

Leica Geosystems Cyclone 9.1.6 (required for Point Cloud functionality in MicroSurvey CAD 2018 Ultimate and Studio): click here

بروز رسانی نرم افزار MicroSurvey CAD

نمایش منابع آنلاین بیشتر در مورد بروز رسانی نرم افزار MicroSurvey CAD

MicroSurvey CAD Release Notes

MicroSurvey CAD Product Website: click here

MicroSurvey CAD Online Training Movies: click here

MicroSurvey CAD Upgrade Tour and Movies: click here

MicroSurvey CAD 2018 Release Notes: click here

MicroSurvey CAD 2018 Frequently Asked Questions: click here

MicroSurvey CAD 2018 Upgrade Notes: click here

MicroSurvey CAD 2018 Known Issues: click here

MicroSurvey CAD 2021 Release Notes

Posted by Jeran Hopfe on 23 December 2020 08:29 AM

Release History

MicroSurvey CAD 2021 (21.0.9.1175) – November 10, 2020

MicroSurvey CAD 2021 Hotfix (21.0.13.1412) – December 22, 2020


Important Notes

Activating or Updating your USB License Key

If you are licensing MicroSurvey CAD Release Notes for the first time you will need to activate your new USB License Key using the USB License Manager program on a computer with internet access.

If you are upgrading from MicroSurvey CAD 2020 thru 2008, you will need to update your existing USB License Key using the USB License Manager program on a computer with internet access.

If you are upgrading from MicroSurvey CAD 2005 or previous, you will need to activate your new USB License Key using the USB License Manager program on a computer with internet access.

A copy of the USB License Manager program is automatically installed with MicroSurvey CAD, or it can be downloaded from our online Helpdesk system and installed separately onto another computer that has internet access.

Please refer to the following topic for detailed instructions about activating or updating your key.

You might not be required to update your USB key to run certain MicroSurvey CAD service pack updates. For a detailed explanation of MicroSurvey’s Annual Maintenance Subscription (AMS) program, and how we use product version numbers and USB keys, you can can refer to the following online article.

If your AMS has not yet expired, you can use the USB License Manager to update your key to work with the most current version. You can confirm the expiry date for the AMS by going to the About screen found in the Help menu. Each USB License Key has its own maintenance subscription plan MicroSurvey CAD Release Notes, so if you have multiple keys it is possible that they may each have a different expiry date.

If your AMS has expired, you can phone us at 1-800-668-3312 or 1-250-707-0000 to renew it. Without a current maintenance subscription plan, you may not be able to update your key to work with the new version.

MicroSurvey Transfer Program for FieldGenius Users

FieldGenius users need to download a copy of the MicroSurvey Transfer program to simplify the process of transferring FieldGenius projects between your data collector and MicroSurvey CAD.

If you have a copy of MicroSurvey Transfer already installed from use with MicroSurvey CAD 2010 or previous, you will need to update it to recognize MicroSurvey CAD 2013 or newer. Previous versions of MicroSurvey Transfer will not show MicroSurvey CAD 2013 or newer as a sync option in the Options screen.

The MicroSurvey Transfer program has not changed since the release of MicroSurvey CAD 2013. This is only necessary for users who are setting up communications between FieldGenius (any version) and MicroSurvey CAD (2013 or newer) for the first time.

MicroSurvey Transfer can be downloaded from our online Helpdesk system.

Note: A copy of Microsoft ActiveSync (for Windows XP or earlier) or Microsoft Windows Mobile Device Center (for Windows Vista or newer) must be installed before MicroSurvey Transfer can be installed. Both can be downloaded free from Microsoft or from the MicroSurvey helpdesk.

MicroSurvey License Server for Network License Users

Users who have purchased a network license will need to install a copy of the MicroSurvey Network License software.

If you have purchased a Network License and are setting it up for the first time, you can download the Network License Server application from our online Helpdesk system.

The MicroSurvey Network License Server program has not changed significantly since the release of MicroSurvey CAD 2008. This is only necessary for users who are setting up a MicroSurvey CAD 2008 or newer network license for the first time.

Note: You will be required to enter a password in order to install the Network License Server.

System Requirements

MicroSurvey CAD 2021 is compatible with 64-bit versions of the following operating systems:

  • Windows 8.1
  • Windows 10

MicroSurvey CAD 2021 is not compatible with any 32-bit operating systemو MicroSurvey CAD Release Notes.

A free USB port is required for connecting the USB License Key (to either the local workstation or the license server, as appropriate).

For a list of minimum and recommended system requirements for MicroSurvey CAD 2021, please visit this helpdesk article.

Full Administrator rights are required to install MicroSurvey CAD 2021, but it can be run by limited user accounts.

Important Announcement re. 32-bit MicroSurvey Applications

MicroSurvey has announced that it will no longer produce new 32-bit versions of MicroSurvey CAD and other products, effective November 1, 2018.

Please refer to this online article for additional details.

Software Requirements

MicroSurvey CAD 2021 Ultimate/Studio requires that the following prerequisite software packages be installed to work with certain point cloud formats:

  1. Leica Cyclone 9.1.1 or newer is required (current version is recommended) to import and view Cyclone point clouds
  2. Leica JetStream 1.0.1 or newer is required to import and view JetStream point clouds
  3. Leica Client License Manager (CLM) 1.4 or newer is required to license Cyclone or JetStream

Please visit the downloads page to download these Leica Geosystems products.

Leica Cyclone and Leica JetStream are licensed independently from MicroSurvey CAD, by entering an entitlement certificate ID into the Leica CLM application.

Leica Cyclone does not have to be licensed. MicroSurvey CAD will be fully functional with an unlicensed version of Cyclone Viewer.

Windows 8.1 and Windows 10 Notes

Run as Administrator

You must run the program at least once elevated with “Run as administrator” access, even if you are already logged in with an “Administrator” account on the computer.

After this is done, it can be run by any user on the computer, including those who don’t have administrative accounts.

To accomplish this, once the program is finished installing do the following:

  1. Right click on the MicroSurvey CAD 2021 icon.
  2. Choose “Run as administrator”.
  3. Select “Yes” on the “User Account Control” dialog when prompted to allow the program to make changes to your computer.

What’s This? Help

If you wish to use the “What’s This? Help” feature, you may need to download and install an update from Microsoft. Please refer to the following Microsoft Knowledge Base article for more information.

Please note that the main Help files will work without this update MicroSurvey CAD Release Notes.


Online Resources

Release Notes

For a current version of this document, please visit the MicroSurvey CAD 2021 Release Notes topic in our online helpdesk.

Known Issues

For a list of known issues please visit the MicroSurvey CAD 2021 Known Issues topic in our online helpdesk.

Training Movies

For over 16 hours of training movies that you can watch online or download for offline viewing, please visit the Training Movies topic in our online helpdesk.

Technical Support

MicroSurvey provides free 24×7 self-support to all users via our online helpdesk at helpdesk.microsurvey.com where you can find knowledgebase articles, downloads, and a troubleshooter. This is a good starting point for any problems that are not answered in your Help file and Manuals.

For technical support, please visit our helpdesk at helpdesk.microsurvey.com to submit a helpdesk ticket to our technical support staff. If you do not have internet access you can phone our office at 1-800-668-3312 or 1-250-707-0000 and a ticket can be entered for you.

Technical Support is provided free of charge for 90-days following the purchase of your MicroSurvey product. Following this introductory period, additional technical support is available via your Annual Maintenance Subscription (AMS).

To purchase or renew your AMS, please phone MicroSurvey Software at 1-800-668-3312 or 1-250-707-0000, phone your local MicroSurvey dealer, or visit our online store at http://store.microsurveysales.com.

Feature Request Forum

Help us make your MicroSurvey product better! To submit a feature request, or to comment and vote on other users’ feature requests, please visit our Feature Request Forum at http://feedback.microsurvey.com.

 


MicroSurvey CAD 2021

Release Date: November 10, 2020

Version: 21.0.9.1175

New Features

Powered by IntelliCAD 10.0
MicroSurvey CAD 2021 is powered by the latest IntelliCAD technology, IntelliCAD 10.0.
See below for additional details about what’s new and fixed in IntelliCAD 10.0.
Shapefile Export
CAD objects, GIS objects, and smart points containing GIS, DBX, and FieldGenius attributes can now be exported to the shapefile format using the GISEXPORT command.
CAD objects will be exported with two attributes; CAD Handle and CAD Layer, for maintaining a reference to the original drawing.
Smart Points will be exported with cartesian and geodetic coordinates, descriptions, and any other associated attributes.
GIS objects will be exported with all original attributes, and GIS points will have cartesian and geodetic coordinates added.
The function will create multiple shapefiles, so the user does not need to select specific objects and object types to satisfy shapefile requirements.
Export Attribute Table
Using the command ATTR_TABLE, you may now quickly export a selection of points and their attributes to CSV format.
This function makes it easy to view all points and attributes in a project when looking for specific values, checking field data, or simply reviewing the project.
Simple Point Cloud Import
If you own a license for Leica Cyclone Publisher or Leica Jetstream Publisher, you may now use the simple point cloud import processes to directly import .las, .pts, and .e57 point cloud files to MicroSurvey CAD.
The two commands to do this are CWIMPORTPC_LGS and CWIMPORTPC_JS.

Enhanced Features

Auto Add Points
The Auto Add Points function (AUTOP) has been enhanced to include Civil 3D COGO points.
AEC COGO points are now read by this command, and point numbers and descriptions are copied to a new MicroSurvey Smart Point at the same location.
Point Cloud Engine
Updated to Leica EpcA 2020.1.0.836.
Supports Leica Cyclone 2020.1, Leica JetStream 2020.1, and Leica Cyclone REGISTER 360 family 2020.1. Older versions are also still supported.

Important Fixes

  • [D10918] SCALEVAL – The custom scale factor was ignoring decimal values and rounding the scale to the nearest integer.
  • [D9985] COGO – Computing a curve using a point number with 10 or more digits would cause a crash.
  • [D10570] FG_MAKE_PROJ – If a selection to export to FieldGenius contained an arctext label, the DXF export would fail.
  • [D10852] FieldGenius Attributes – The icon for FieldGenius attributes was not being displayed in the Active Coordinate Editor.
  • [D10479] MSCOPY – The block inserted into the second drawing was not being automatically exploded on insertion.
  • [D10979] MSALIGN – The block inserted into the second drawing was not being automatically exploded on insertion.
  • [F4300] Licensing Dialog – The Activate License button has been de-emphasized and a request trial button has been added.
  • [F4348] News Feed – The default IntelliCAD news feed has been removed from the Start Page.
  • [F4273] Attributes Viewer – The attributes viewer window is now resizeable and contains scroll bars to view many or long attribute values.
  • [D10104] South Azimuth – South Azimuth entry in the lot closure function would treat entries as North Azimuth.
  • بروز رسانی نرم افزار MicroSurvey CAD

New and Enhanced Features in IntelliCAD 10.0

Performance
Switch easily between graphics devices, including OpenGL ES, to improve quality and display performance. Click Switch Graphics Device on the status bar, or right-click and choose Settings for more options.
A new high-performance progress indicator displays for complex tasks that may take extra time to complete.
Working with files
Import Wavefront Technologies Object (.obj) files and Stereolithography (.stl) files.
Export Stereolithography (.stl) files.
Exporting to PDF now uses the PDFium library.
BIM Files
Draw roofs and beams.
Create mitered joints for beams.
Use the BIM Explode command to explode attached BIM underlays into polyface meshes and polylines that can be edited.
New options for section lines and elevation lines.
MicroSurvey CAD Release Notes
User Interface
Migrate user interface customizations from previous versions of IntelliCAD to the current version using the MIGRATE command.
Import and export .cui files directly using the new CUIIMPORT and CUIEXPORT commands.
Open a tool palette directly using the TPNAVIGATE command.
Determine whether the mouse wheel can be used to scroll ribbon tabs.
Use the CLEANSCREENOPTIONS command to determine which user interface items are hidden when using CLEANSCREENON.
Clickable keywords are now available for all command prompts. They allow you to quickly select options when you run a command.
Status bar icons are redesigned, including a 50% increase in size.
Enhancements for Section 508 usability and also 4K and larger displays.
Drawing, selecting, and modifying entities
Dynamic input includes command prompts and measurement guides that display on the screen as you draw and edit drawings. Dynamic input is turned on by default.
To change the settings, use Toggle Dynamic Input On/Off in the status bar.
The Properties pane supports display and selection for many new properties of various entity types. You can also view properties of custom objects.
Multiline text
Combine multiple paragraphs of multiline text into a single paragraph.
Clear formatting from characters and paragraphs.
Paste text without formatting.
بروز رسانی نرم افزار MicroSurvey CAD
Viewing drawings
The redesigned View Manager has many more options, including the ability to dynamically set a view’s background, perspective, lens length, clipping, and more.
View drawings using additional visual styles, including Shaded, Sketchy, X-ray, and more.
Include background images.
Display materials and lights.
Improved transparency quality.
Explorer
Use the new Explore Materials command to import materials that can be assigned to entities and layers and viewed in the drawing with the Realistic visual style.
Re-order layer filters by dragging and dropping them in the list, or sort them alphabetically.
Assign materials by layer in Explore Layers.
Printing and publishing
Customize .pc3 files with many more options, including margins and .pmp files. Click Properties for a .pc3 file in the Print dialog box.
Select a layer state for each sheet when publishing drawings.
APIs
ODA SDKs version 2020 Update 2.
.NET PaletteSet API.
IRX API: AcUI* controls.
More features
More colors are available in the color book sample.
Export a layout to model space of a new drawing using the Export Layout command.
Import and export system variable settings using the new SVIMPORT and SVEXPORT commands.
The Purge command supports materials.
The eTransmit command can include background images and material bitmaps.
New and changed system variables
New system variables: BIMUNITS, BLOCKEDITNAME, DEFAULTLIGHTINGINTENSITY, DGNWORKSPACE, DWGWORKSPACE, DYNDIGRIP, DYNDIVIS, DYNMODE, DYNPICOORDS, DYNPIDISPMODEBOX, DYNPIFORMAT, DYNPIVIS, DYNPROMPT, DYNSHOWDEFAULT, DYNTOOLTIPCOLORLAYOUTBKG, DYNTOOLTIPCOLORLAYOUTTEXT, DYNTOOLTIPCOLORMODELBKG, DYNTOOLTIPCOLORMODELTEXT, DYNUSEANGBASE, EMPTYWORKSPACE, EXPLSTMAT, GRDRAWPACKAGESIZE, GSMSAA, GSUSEDDEVICEMODE, LENGTHENOLDCOMPAT, LINESMOOTHING, MATERIALLIBPATH, PRESERVEDOCUMENTWORKSPACE, PSPACEBKGCOLOR, RIBBONMOUSEWHEEL, SELECTIONCYCLING, SELECTIONCYCLINGMODE, VSBACKGROUNDS, VSEDGEJITTER, VSEDGES, VSEDGESMOOTH, VSFACEHIGHLIGHT, VSFACEOPACITY, VSFACESTYLE, VSHALOGAP, VSISOONTOP, VSMATERIALMODE, VSSILHEDGES, VSSILHWIDTH.
SHOWTABS renamed to LAYOUTAB.
WNDLSTAT renamed to STATUSBAR.

Important Fixes in IntelliCAD 10.0

The following list details some of the many fixes that were implemented since the 9.2a release.

Performance
Array command is two times faster.
Freezing and thawing layers in viewports is 15 times faster.
Using the layers list in Layer Explorer is 8 times faster for drawings with long lists of layers.
GRDRAW display performance is 2 times faster.
Additional improved performance for selection preview, explore blocks, offset, overkill, snapping in large drawings, boundary hatches with island detection.
Working with files
Fixed issues with automatic saving of drawings.
Fixed issue with specific drawings exporting to 3D PDF.
Fixed display of .rcp files for point cloud underlays.
Fixed specific issues with the content of exported .dwf files.
Improved error prompts when a BIM file cannot be attached or imported.
Fixed imported geometry for IFC format files converted from Autodesk® Revit® 2019.
Several fixes for using the BIM Properties pane.
Fixed snapping to large underlays.
Fixed DIMDIAMETER and DIMRADIUS for wall arc segments.
Fixed display of AEC entities in certain scenarios.
Editing and selecting entities
Many improvements to editing with grips.
Several fixes for selection cycling and entity snapping.
Several improvements for the Selection Filter pane.
Fixed several issues for the OFFSET, EXTEND, FILLET, CHAMFER, and TRIM commands.
Fixed issue when scaling by point.
Fixed error when working with a specific sequence of copying and then zooming in and out.
Many improvements to the Properties pane.
بروز رسانی نرم افزار MicroSurvey CAD
Text
Several fixes for multiline text formatting.
Fixed issue with the multiline text window display.
Fixed bold and italic text pasted from .rtf files.
Several fixes for the ruler in the multiline text editor.
Fixed formatting of SHX text in non-English languages.
Fixed error when handling text assigned a font that isn’t found.
Several fixes for stacked text.
Blocks and external references
Fixed issue with PASTEBLOCK after hatching.
Fixed reloading external reference when saving and printing.
Fixed ability to edit blocks created from 3D solids.
Fixed block position when it is created at an offset distance of the UCS origin.
Printing
Fixed issue when printing did not use the correct paper size.
Fixed specific issue for printing with transparency.
Fixed drawing orientation when using XGA size type with .pc3 files.
Fixed printing of entities that are assigned different linetypes.
APIs
SDS: Fixes for sds_cbentdel, sds_cbentmake, sds_cbentmod, and sds_ssgetwithprompt.
LISP: Fixed error in the lsp_ssname() function, (getpoint), (grread), and (vl-registry-write).
VBA: Fixed issue with AddEllipse method.
بروز رسانی نرم افزار MicroSurvey CAD
More fixes
Fixed several issues with the block editor.
Several improvements made to working with fields.
Many improvements and fixes for the Customize User Interface dialog box.
Several user interface improvements for IntelliCAD Converter.
Fixed display and creation of hatches and hatch boundaries in specific scenarios.
Several fixes for publishing drawings.
Several fixes for dimentions.
Several fixes for multileaders.
Fixed issues with the HPTRANSPARENCY and CETRANSPARENCY system variables.
Fixed specific issues for working with facet meshes.
Fixed panning inside a locked viewport.
Several fixes for working with raster images.
Fixed camera height issue for cameras.
Many fixes for command prompts of various commands.
Several fixes for the OVERKILL command.

MicroSurvey CAD 2021 Hotfix

Release Date: December 22, 2020

Version: 21.0.13.1412

Important Fixes

  • [INSTALLER] INSTALLER – User unexpectedly prompted for administrator privileges prior to installation
  • [D10999] GISEXPORT – Coordinate systems always exported as metric
  • [D5667] CIRCLE – Distance scaling with “s” suffix doesn’t work
  • [D9853] EDITALIGN – Editing an alignment curve causes a crash
  • [D10511] Lot Closure – Closures with multiples of 13 sides appear to be corrupt and are not editable
  • [D10635] PROC_FIGURE – Not working at all
  • [D10861] ATTACH_IMAGERY – Address or lat/long input places image at 0,0
  • [D10888] SHIFTP – Arcs duplicated if linked to database
  • [D10901] Lot Closure – Curve radius and chord length no longer selectable from distance labels
  • [D10931] CAD Polylines – Misclosure details not computed for non-database polylines
  • [D10969] CAD Polylines – Vertex information incorrect for splined polylines
  • [D11014] AUTOP – Adding points to a 3D line sets the resulting line record as 2D
  • [D8945] MAPPING_GRID – Very large area selection can cause a crash or lockup
  • [D9795] LL_TRANSFORM_COORDINATES – Missing grid shift file error message incorrect
  • [D9984] DO_PROPORTION – Crash if no points selected
  • [D10059] GOOGLE EARTH – KML export fails when point blocks are used
  • [D10089] EDITPG – Editing a locked point’s coordinates still possible via EDITPG
  • [D10139] Active Coordinate Editor – Shifting points treats certain point numbers as ranges (dashes, dots, commas)
  • [D10210] System Toggles – Clear log file does nothing
  • [D10343] RENUMP – Pressing Esc during renumbering cancels the process midway, leaving partial results
  • [D10872] FieldGenius Attributes – Viewing other attributes clears saved attributes
  • [D11016] FASTAREA – Changes current text style to new area text style
  • [D11020] GISEXPORT – Point blocks not included in export
  • [D11025] Re-coordinate Traverse – Pressing Esc during re-coordination cancels the process midway, leaving partial results
  • [D11026] CAD Polylines – Misclosure details not shown for splined polylines
  • [D4393] FILEDIA – System variable turned off after using PROJECT_MANAGER within a project
  • [D10499] On-curve labels placed in wrong location when Autoadd Database checkbox is off
  • [D11037] Incorrect path in support files causes tool palette duplication
  • [D11041] Switching to legacy workspace on start page
  • [D10460] Netherlands RDNAP2008 coordinate system causes database issues
  • [D11032] Breaking a Z-Coded 2D line causes a handled exception
  • [D10662] Changing general config options after opening a drawing doesn’t prompt for save on exit
  • [D9389] 2D point nodes not honored from ASCII import
  • [D10749] CALC_CLOSURE – Z letters displayed in IPN
  • [D10886] IntelliCAD help not working
  • [D10915] MSRENDER writes X99.dat in the wrong location
  • [D11038] GISEXPORT – Projection file writing still attempted when no coordinate system available
  • [F4396] CWELEVATIONVIEW and CWPLANVIEW not set when selected
  • بروز رسانی نرم افزار MicroSurvey CAD

MicroSurvey CAD 2020 Release Notes


Release History

MicroSurvey CAD 2020 (20.0.6.460) – October 31, 2019

MicroSurvey CAD 2020 SP1 (20.1.4.667) – February 11, 2020


Important Notes

Activating or Updating your USB License Key

If you are licensing MicroSurvey CAD for the first time you will need to activate your new USB License Key using the USB License Manager program on a computer with internet access.

If you are upgrading from MicroSurvey CAD 2019 thru 2008, you will need to update your existing USB License Key using the USB License Manager program on a computer with internet access.

If you are upgrading from MicroSurvey CAD 2005 or previous, you will need to activate your new USB License Key using the USB License Manager program on a computer with internet access.

A copy of the USB License Manager program is automatically installed with MicroSurvey CAD, or it can be downloaded from our online Helpdesk system and installed separately onto another computer which has internet access.

Please refer to the following topic for detailed instructions about activating or updating your key.

You might not be required to update your USB key to run certain MicroSurvey CAD service pack updates. For a detailed explanation of MicroSurvey’s Annual Maintenance Subscription (AMS) program, and how we use product version numbers and USB keys, you can can refer to the following online article.

If your AMS has not yet expired, you can use the USB License Manager to update your key to work with the most current version. You can confirm the expiry date for the AMS by going to the About screen found in the Help menu. Each USB License Key has its own maintenance subscription plan, so if you have multiple keys it is possible that they may each have a different expiry date.

If your AMS has expired, you can phone us at 1-800-668-3312 or 1-250-707-0000 to renew it. Without a current maintenance subscription plan, you may not be able to update your key to work with the new version.

MicroSurvey Transfer Program for FieldGenius Users

FieldGenius users need to download a copy of the MicroSurvey Transfer program to simplify the process of transferring FieldGenius projects between your data collector and MicroSurvey CAD.

If you have a copy of MicroSurvey Transfer already installed from use with MicroSurvey CAD 2010 or previous, you will need to update it to recognize MicroSurvey CAD 2013 or newer. Previous versions of MicroSurvey Transfer will not show MicroSurvey CAD 2013 or newer as a sync option in the Options screen.

The MicroSurvey Transfer program has not changed since the release of MicroSurvey CAD 2013. This is only necessary for users who are setting up communications between FieldGenius (any version) and MicroSurvey CAD (2013 or newer) for the first time.

MicroSurvey Transfer can be downloaded from our online Helpdesk system.

Note: A copy of Microsoft ActiveSync (for Windows XP or earlier) or Microsoft Windows Mobile Device Center (for Windows Vista or newer) must be installed before MicroSurvey Transfer can be installed. Both can be downloaded free from Microsoft or from the MicroSurvey helpdesk.

MicroSurvey License Server for Network License Users

Users who have purchased a network license will need to install a copy of the MicroSurvey Network License software.

If you have purchased a Network License and are setting it up for the first time, you can download the Network License Server application from our online Helpdesk system.

The MicroSurvey Network License Server program has not changed significantly since the release of MicroSurvey CAD 2008. This is only necessary for users who are setting up a MicroSurvey CAD 2008 or newer network license for the first time.

Note: You will be required to enter a password in order to install the Network License Server.

System Requirements

MicroSurvey CAD 2020 is compatible with 64-bit versions of the following operating systems:

  • Windows 7 SP1 (with latest Windows Updates)
    • Please see the article here regarding End of Support for Windows 7
  • Windows 8.1 (with Update 2919355)
  • Windows 10 version 1507 or higher

MicroSurvey CAD 2020 is not compatible with any 32-bit operating system.

A free USB port is required for connecting the USB License Key (to either the local workstation or the license server, as appropriate).

MicroSurvey CAD 2020 does not have any hardware requirements above and beyond what is required by your version of Microsoft Windows, aside from a compatible video card for the 3D Rendering engine. Please refer to this online article for a list of compatible video cards.

Full Administrator rights are required to install MicroSurvey CAD 2020, but it can be run by limited user accounts.

Important Announcement re. 32-bit MicroSurvey Applications

MicroSurvey has announced that it will no longer produce new 32-bit versions of MicroSurvey CAD and other products, effective November 1, 2018.

Please refer to this online article for additional details.

Software Requirements

MicroSurvey CAD 2020 Ultimate/Studio requires that the following prerequisite software packages be installed to work with certain point cloud formats:

  1. Leica Cyclone 9.1.1 or newer is required (current version is recommended) to import and view Cyclone point clouds
  2. Leica JetStream 1.0.1 or newer is required to import and view JetStream point clouds
  3. Leica Client License Manager (CLM) 1.4 or newer is required to license Cyclone or JetStream

Please visit www.leica-geosystems.com to download these Leica Geosystems products. A registered account is required.

Leica Cyclone and Leica JetStream are licensed independently from MicroSurvey CAD, by entering an entitlement certificate ID into the Leica CLM application.

Leica Cyclone does not have to be licensed. MicroSurvey CAD will be fully functional with an unlicensed version of Cyclone Viewer.

Windows Windows 7, Windows 8.1 and Windows 10 Notes

Run as Administrator

You must run the program at least once elevated with “Run as admininstrator” access, even if you are already logged in with an “Administrator” account on the computer.

After this is done, it can be run by any user on the computer, including those who don’t have administrative accounts.

To accomplish this, once the program is finished installing do the following:

  1. Right click on the MicroSurvey CAD 2020 icon.
  2. Choose “Run as administrator”.
  3. Select “Yes” on the “User Account Control” dialog when prompted to allow the program to make changes to your computer.

What’s This? Help

If you wish to use the “What’s This? Help” feature, you may need to download and install an update from Microsoft. Please refer to the following Microsoft Knowledge Base article for more information.

Please note that the main Help files will work without this update.


Online Resources

Release Notes

For a current version of this document, please visit the MicroSurvey CAD 2020 Release Notes topic in our online helpdesk.

Known Issues

For a list of known issues please visit the MicroSurvey CAD 2020 Known Issues topic in our online helpdesk.

Training Movies

For over 16 hours of training movies that you can watch online or download for offline viewing, please visit the Training Movies topic in our online helpdesk.

Technical Support

MicroSurvey provides free 24×7 self-support to all users via our online helpdesk at helpdesk.microsurvey.com where you can find knowledgebase articles, downloads, and a troubleshooter. This is a good starting point for any problems that are not answered in your Help file and Manuals.

For technical support, please visit our helpdesk at helpdesk.microsurvey.com to submit a helpdesk ticket to our technical support staff. If you do not have internet access you can phone our office at 1-800-668-3312 or 1-250-707-0000 and a ticket can be entered for you.

Technical Support is provided free of charge for 90-days following the purchase of your MicroSurvey product. Following this introductory period, additional technical support is available via your Annual Maintenance Subscription (AMS).

To purchase or renew your AMS, please phone MicroSurvey Software at 1-800-668-3312 or 1-250-707-0000, phone your local MicroSurvey dealer, or visit our online store at http://store.microsurveysales.com.

Feature Request Forum

Help us make your MicroSurvey product better! To submit a feature request, or to comment and vote on other users’ feature requests, please visit our Feature Request Forum at http://feedback.microsurvey.com.


MicroSurvey CAD 2020

Release Date: October 31, 2019

Version: 20.0.6.460

New Features

Powered by IntelliCAD 9.2
MicroSurvey CAD 2020 is powered by the latest IntelliCAD technology, IntelliCAD 9.2.
See below for additional details about what’s new and fixed in IntelliCAD 9.1 and 9.2.
Arc Labeling with ArcAlignedText
Arcs can now be labeled with an ArcAlignedText object instead of multiple text objects
The following commands can now create an ArcAlignedText label: Label on Arc, Manual Label on Arc, Text on Arc.
The Labeling Defaults: Curves command has a new option to create ArcAlignedText labels.
ArcAlignedText labels can be edited using the ARCTEXT command.
ArcAlignedText labels can be moved using the Rotate Text and Slide Text commands.
ArcAlignedText labels can be selected in the Lot Closure command.

Enhanced Features

Coordinate System Engine
The CS-Map coordinate system engine has been upgraded and includes over 125 new coordinate systems.
Areas with the most additions include Africa (Namibia and Morocco), Asia (Korea and Malaysia), Australia/New Zealand (GDA2020 systems), Europe (Several zones), and US OCRS systems.
A common package is now shared by MicroSurvey CAD, STAR*NET and FieldGenius so future changes made by MicroSurvey for one product can be efficiently integrated into the other.
Note, certain geoid models and grid shift files must be downloaded separately from the MicroSurvey Helpdesk or applicable government agency.
بروز رسانی نرم افزار MicroSurvey CAD
Point Cloud Engine
Updated to Leica EpcA 3.4.
Supports Leica Cyclone 9.4, Leica JetStream 1.5, and Leica Cyclone REGISTER 360 1.5. Older versions are also still supported.

Important Fixes

  • [D09281] AutoMAP Library – After deleting the last code from the current library the program may terminate unexpectedly or generate an error message.
  • [D10291] AutoMAP Library – After creating a New Library the previously displayed block preview is not cleared.
  • [D08226] Active Traverse Editor – The Adjust Traverse Scans command can cause the point cloud(s) to unexpectedly disappear.
  • [F03968] Assistant – The Assistant is now turned off by default. It can still be accessed via the Assistant command.
  • [D10314] Export ASCII – Exporting an ASCII file with a Coordinate Transformation set can cause incorrect unit scaling.
  • [D10354] Import DBX – Importing a DBX project while the Active Coordinate Editor is open can cause unexpected error messages.
  • [F03924] Interface – Some color and appearance defaults have been changed.
  • [T02361] Installer – The Uninstall Survey questionnaire is now suppressed when installing an upgrade.
  • [D10266] Labeling – The Bearing Seconds Rounding option set to 60 can cause unexpected results, for example 203°59’45” rounds to 203°60′ not 204°00′
  • [F00952] Lot Closure – When deleting a lot closure, the corresponding report file “lc_name.txt” is now also deleted.
  • [D10275] Lot Closure – The Lot Closure Report now honors the “List E,N (X,Y) Format” system toggle.
  • بروز رسانی نرم افزار MicroSurvey CAD

New Features in IntelliCAD 9.1

Performance
The flood fill hatch algorithm was refactored for improved performance.
Improved performance when snapping to .pdf files, blocks with many nested entities, and point clouds.
Opening external reference files is now faster.
Improved performance when selecting by window.
Working with files
Attach digital signatures to .dwg files, and validate attached digital signatures.
Attach version 2019 .rvt/.rfa files and draw more AEC entities such as stairs, railings, and steel.
User interface
In the command bar, click keywords to select options when you run a command. As a result, prompt boxes have been turned off by default. To turn them on, go to Tools > Options > Display.
When you start IntelliCAD, a Start Page displays automatically where you can quickly open files or choose from other common tasks.
Click Toggle Clean Screen On/Off in the status bar to quickly hide most user interface items so that only model and layout tabs, the menu bar and the status bar are displayed on the screen. Click again to reverse the effects.
Add blocks to tool palettes, which is similar to creating a stencil for quickly selecting and adding anything from shapes to complex blocks to your drawings.
بروز رسانی نرم افزار MicroSurvey CAD
To customize the user interface, use the Customize User Interface (CUI) command. The Customize (CUSTOMIZE) command is now used for customizing tool palettes into groups and importing and exporting tool palettes.
Set the transparency of the Properties pane, Tool Palettes pane, and Explorer Palette pane.
Reset the ribbon (for IntelliCAD versions that have a ribbon), menus, toolbars, aliases, keyboard shortcuts, and double-click actions to their original settings using the Reset User Interface (RESETUI) command.
The new Save Workspace (WSSAVE) command is a shortcut for saving a workspace and its settings.
The new File Tab and File Tab Close commands are shortcuts for turning the display of file tabs at the top of the drawing on or off.
The Close All Others (CLOSEALLOTHER) command closes all drawing windows except the current one.
Creating entities
The new Gradient command is a shortcut for using the Hatch and Gradient dialog box to add gradients to entities.
Convert entities to three-dimensional meshes or surfaces using the Convert to Mesh and Convert to Surface commands.
Use the FM3DCONVERT and FMEXTRUDE commands to convert more types of three-dimensional entities to other types of three-dimensional entities.
Selecting and modifying entities
New selection grips allow you to quickly move, scale, and rotate all selected entities. These types of grips can be helpful for schematic drawings where precise scale or sizing is not required.
Viewing entities
Use the new List Viewport Scale command to obtain the scale of a selected viewport on a Layout tab.
Use the new Synchronize Viewport command to synchronize all selected viewports to use the zoom factor of a master viewport that you select.
Change the display of edges of three-dimensional entities using these new commands:
The Edge command controls the visibility of selected edges of 3D faces.
The Show Edges command displays all edges of selected 3D faces, meshes, and polyface meshes.
The Hide Edges command hides all edges of selected 3D faces, meshes, and polyface meshes.
بروز رسانی نرم افزار MicroSurvey CAD
Blocks
Create and edit blocks using the new Block Editor, which allows you to draw and save a block in-place, directly in the drawing area.
Print
Print directly to PDF, including support for many sheet sizes and PDF options.
Publish to PDF, including support for many PDF options.
Select from new sheet sizes included for printing to raster images.
More features
Use the new System Variable Manager to view and edit all system variables and their values.
Choose more formatting styles for lists of multiline text. Just start typing, for example, type (1) to start a numbered list with parentheses.
Open the standard Microsoft® Windows® Notepad application using the Notepad command.
New and changed system variables
New system variables: 3DOSMODE, BKGCOLORBEDITOR, BLOCKEDITOR, COLORXBEDITOR, COLORYBEDITOR, COLORZBEDITOR, DISABLEDIGITALSIG, GRIDCOLORMAJORBEDITOR, GRIDCOLORMINORBEDITOR, LOGFONTSERVICE, PDBOFFSETAUTOUPDATE, SHOWMESHEDGES, SIGWARN, STARTMODE, STEELTABINDEX, SUBDIVIDELEVEL.
Changed system variable: EXPPALETTES (default changed to 1), SHORTCUTMENU (default changed to 3), and SKETCHMODE (new value added, 4).
Removed system variable: LINESTARTPOINT.

New Features in IntelliCAD 9.2

Performance
Improved memory consumption when working with raster images.
Improved memory consumption and speed when using IntelliCAD Explorer for blocks.
User interface
Use the Quick CUI command to display a small version of the Customize User Interface dialog box so you can quickly add commands to the Tool Palettes pane.
On the status bar you can now toggle Cursor Type (regular or gunsight) and XOR Cursor (cursor color is inverted when overlapping an area of the same color).
The Start Page now has drawing previews.
Right-click a drawing tab to see options for the tab.
بروز رسانی نرم افزار MicroSurvey CAD
Creating entities
Draw curtain walls, studs, joists, track, and wood.
Convert entities to walls and slabs.
Create elevation lines and section lines.
The boundary option is now available for -HATCH.
Selecting and modifying entities
Use the Selection Filter command to display the Selection Filter pane, which displays all entities in the drawing and allows you to filter and select entities by layer, color, entity type, and linetype.
Click the Selection Cycling tab in the Options dialog box to specify which method you want to use when selecting entities that overlap.
Use the Overkill command to delete or combine duplicate or overlapping entities in a drawing, reducing the drawing’s file size and complexity.
If you choose Undo or Redo from the ribbon toolbar, you can view and also select a range of actions.
Polygons, rectangles, and break lines have additional grips and properties for smart editing.
Text
Work with multiline text using right-to-left fonts.
Create additional types of lists for multiline text.
بروز رسانی نرم افزار MicroSurvey CAD
Print
Publish drawings to DWF and DWFx.
Use the Auto Publish command to automatically create electronic files (.dwf/.pdf) from the current drawing.
New and changed system variables
New system variables: AECAUTOUPDATE, AUTOMATICPUB, AUTOPUBLISHPATH, BLOCKEDITLOCK, CROSSHAIRMODE, OVERKILLMODE, OVERKILLTOLERANCE, OVERKILLTOLARCCHORD, OVERKILLTOLARCENDPOINT, REFPATHTYPE, SELECTIONCYCLING, SJTABTINDEX, TASKBAR, WOODTABINDEX, and XREFNOTIFY.
HPPREVIEW renamed to HPQUICKPREVIEW.
TOOLPALETTESSTATE renamed to TPSTATE.
WSUPDATEALL new valid range 0 to 2.
بروز رسانی نرم افزار MicroSurvey CAD

Important Fixes in IntelliCAD 9.1

The following list details some of the 800+ fixes that were implemented since the 9.0a release.

Working with files
Several fixes for working with point clouds.
Fixed issue when exporting to .bmp files.
Fixed issue when autosaving password-protected drawings.
بروز رسانی نرم افزار MicroSurvey CAD
User interface
Several fixes when using tool palettes.
Fixed issue when importing specific .mnu files.
Toggle Viewport Lock/Unlock added to the status bar for layout viewports.
Editing and selecting entities
Many fixes to working with entity properties.
Several fixes for editing multiline text, including undo/redo results, list indents, and oblique angles.
Fixed issue with JOIN command for lines and arcs.
Fixed issue when using entity snaps, including Nearest Entity Snap, and Endpoint Snap with multilines in external references and blocks.
Fixed issue when temporary ORTHO mode remains active.
Several fixes for entity grips, including when working with dynamic blocks.
Fixes for FILLET and CHAMFER commands.
Fixed selection issues, including previous selection when using pickfirst selection and when using Window or Cross Selection for a block reference on a layer that is turned off.
Several fixes for undoing operations.
بروز رسانی نرم افزار MicroSurvey CAD
Hatches
Fixed issue when hatching an island during hatch creation.
Fixed issue when removing hatch boundaries.
Fixed hatches created while using the REFEDIT command that lost associativity after REFCLOSE.
Fixed issue with “Inherit properties” option.
Printing
Fixed issue with print transparency when using “PublishToWeb JPG” and “PublishToWeb PNG”.
Fixed issue with POINTCLOUDPOINTSIZE system variable when printing to a WinGDI-based device.
More fixes
Many fixes for working with fields.
Double-clicking a dimension now starts the DDEDIT command.
Fixed issues with the LIST command.
The IMAGECLIP command now supports selection of an existing polyline.
The Linetype dialog now saves the previously loaded .lin file between sessions.
The FINDTEXTINT now applies to attributes.
Annotation scales that are in use can now be deleted.
Added logging for font substitutions.
Select All (Ctrl+A) now works in the Linetypes dialog box.
Several fixes for working with helix entities.
Fixed issue when freezing layers in a current viewport and creating new viewports.
بروز رسانی نرم افزار MicroSurvey CAD

Important fixes in IntelliCAD 9.2

The following list details some of the 900+ fixes that were implemented since the 9.1 release.

Working with files
Several fixes when exporting 3D solids to .sat files.
Fixed issue when exporting blocks to .bmp files.
Fixed issue with opening and attempting to save read-only files.
User interface
When viewing the properties of a tool on the Tool Palettes pane, a preview of the tool icon now displays.
Fixed memory leak in Properties pane for reported updates of Microsoft Windows 10 operating systems.
Editing and selecting entities
Scale option fixed for the Sweep command.
Fixed scaling of annotation entities when the current annotation scale is changed.
Fixed issue when trimming ellipses.
Fixed display of the gunsight cursor when the PERSPECTIVE is turned On.
Fixed Undo error after using BEDIT.
Fixed issue with Properties pane when modifying fields.
بروز رسانی نرم افزار MicroSurvey CAD
Text
Fixed display of justified text.
Fixed issues with changing text styles.
Fixed several issues with lists, stacked text, and underlined/overlined text.
Fixed issues when converting fields to text.
Fixed issues when combining paragraphs.
Printing
Fixed issue when printing after previewing in 3D Hidden or Realistic.
Fixed reported issues when previewing or printing to specific printers.
Fixed scenario when printing with transparency was ignored.
بروز رسانی نرم افزار MicroSurvey CAD
More fixes
Fixed issue with visualizing 3D solids in Hidden and Shaded modes.
Fixed disappearing blocks after discarding changes.
Fixed color boundary of text with specific lineweights.
Fixed several issues when displaying 3D solids.
Fixed response error when drawing specific hatches.
Fixed display of progress bar when running multiple commands.
Highlighting fixed for the Linetypes dialog box.
Fixed incorrect view in a viewport with rotated UCS.
Several fixes for specific entities when using the LIST command.

MicroSurvey CAD 2020 Service Pack 1

Release Date: February 11, 2020

Version: 20.1.4.667

New Features

Leica DBX Import Point Attributes
Point attributes are now imported from Leica Viva/Captivate DBX projects via the DBXIN command.
Attribute data is viewable via the Attributes button on the Single Point Editor dialog or the Attributes column in the Active Coordinate Editor window.

Enhanced Features

Symbol Librarian
The Symbol Librarian (INSYM command) has been redesigned and streamlined with a more modern appearance.
FieldGenius SyncWizard
The FieldGenius Import (SYNCWIZARD command) has been redesigned and streamlined with a more modern appearance.
بروز رسانی نرم افزار MicroSurvey CAD
Drawing1.dwg
The default “drawing1.dwg” file is no longer created on startup if the Start Screen is turned on.

Important Fixes

  • [D10389] AutoSave – The IntelliCAD AutoSave feature shows error message “0 files were compressed” and does not create a recoverable backup (.SV$ file) of the current database (.MSJ folder).
  • [D10392] FieldGenius – Exporting a FieldGenius Project creates an invalid DXF file so linework is not displayed when the project is opened in FieldGenius.
  • [D10318] Point Cloud – Opening a drawing containing a point cloud can cause the program to stop responding in some scenarios.
  • [D10449] CAD Editing – Double-clicking on a text/mext object does not start the TEXTEDIT command.
  • [D10519] CAD Editing – Cancelling a grip edit by pressing Esc mid-move causes the database to stop updating.
  • [D10483] ASCII Export – Exporting a lat/long file does not write the complete point descriptions.
  • [D10501] Recovery Wizard – The Recovery Wizard would unexpectedly prompt to Save the current state of the drawing before recovering the previous state.
  • [F03367] Help – The “What’s This?” Help buttons (unsupported in Windows 10) have been removed from all dialogs.
  • [D10522] Compatibility – Drawings were not cross-compatible between MicroSurvey CAD and Leica CAD.
  • بروز رسانی نرم افزار MicroSurvey CAD

ادمینAuthor posts

Avatar for ادمین

طراح حرفه ای وب سایت در ایران.

No comment

دیدگاهتان را بنویسید